How to Enter ADB Mode on Android FRP Locked Phone
In today’s digital age, Android smartphones have become an integral part of our lives. However, encountering a situation where your Android device is FRP (Factory Reset Protection) locked can be quite frustrating. One common issue faced by many users is the inability to access the ADB (Android Debug Bridge) mode on their FRP-locked phones. In this article, we will guide you through the process of entering ADB mode on an Android FRP locked phone, enabling you to bypass the lock and access your device’s functionalities.
Understanding FRP Lock and ADB Mode
FRP is a security feature implemented by manufacturers to prevent unauthorized access to a device after a factory reset. When a device is FRP locked, it requires a Google account to be entered during the initial setup process. ADB mode, on the other hand, is a command-line tool that allows you to communicate with your Android device from a computer, enabling you to perform various tasks such as installing custom ROMs, flashing recovery images, and more.
Steps to Enter ADB Mode on Android FRP Locked Phone
1.
Backup Your Data
Before proceeding with the steps to enter ADB mode, it is essential to backup your important data to avoid any potential loss during the process.
2.
Download and Install ADB and Fastboot Drivers
Download the ADB and Fastboot drivers from the official Android Developers website and install them on your computer. This will ensure that your computer can communicate with your Android device.
3.
Enable USB Debugging on Your Phone
Connect your Android device to the computer using a USB cable. Go to Settings > About Phone > Build Number and tap on it for several times until you see a message saying “You are now a developer.” Go back to Settings, scroll down, and enable USB Debugging.
4.
Enter Download Mode
To enter Download Mode, turn off your device and press and hold the Volume Down and Power buttons simultaneously. Keep holding these buttons until you see the Android logo on your screen. Then, press the Volume Up button to enter Download Mode.
5.
Connect Your Device to the Computer
Connect your Android device to the computer using a USB cable while it is in Download Mode. Your computer should recognize the device, and you should see a message indicating that a new hardware device has been detected.
6.
Open Command Prompt or Terminal
Open Command Prompt (on Windows) or Terminal (on macOS and Linux) on your computer. Navigate to the directory where you installed ADB and Fastboot drivers.
7.
Check Device Connection
Type the following command in the Command Prompt or Terminal and press Enter:
“`
adb devices
“`
If your device is connected successfully, you will see a list of devices with your device’s serial number.
8.
Enter ADB Mode
Type the following command in the Command Prompt or Terminal and press Enter:
“`
adb reboot bootloader
“`
Your device will now reboot into bootloader mode.
9.
Enter Fastboot Mode
To enter Fastboot Mode, press the Volume Up and Power buttons simultaneously while your device is turned off. Keep holding these buttons until you see the Fastboot logo on your screen.
10.
Access ADB Commands
Now that your device is in Fastboot Mode, you can use ADB commands to access your device’s functionalities. For example, to install a custom recovery, you can use the following command:
“`
fastboot flash recovery recovery.img
“`
Replace “recovery.img” with the actual recovery image file name.
By following these steps, you should now be able to enter ADB mode on your Android FRP locked phone. This will enable you to bypass the FRP lock and access your device’s functionalities. Remember to exercise caution while performing these steps, as they may void your device’s warranty.
