How to Disconnect Joycons from Switch
Are you looking to disconnect your Joycons from your Nintendo Switch? Whether you’re cleaning the console, moving to a different location, or simply want to store your Joycons separately, this guide will walk you through the process step by step. Disconnecting Joycons from the Switch is a straightforward task that can be done in just a few simple steps.
Step 1: Power Off Your Nintendo Switch
Before you begin, make sure your Nintendo Switch is powered off. This will prevent any accidental inputs or damage to your console while you’re disconnecting the Joycons.
Step 2: Open the Back of the Nintendo Switch
To access the Joycon ports, you’ll need to open the back of the Nintendo Switch. Use a flathead screwdriver to remove the two screws located on the back of the console. Once the screws are removed, gently lift the back cover off to expose the internal components.
Step 3: Locate the Joycon Ports
Inside the back of the Nintendo Switch, you’ll find two ports on the left side of the console. These are the ports where the Joycons are connected. The ports are designed to fit the Joycons securely, so they won’t come off easily.
Step 4: Disconnect the Joycons
Grip the Joycons firmly and gently pull them out of the ports. You may feel some resistance at first, but continue pulling until the Joycons are fully disconnected. Be careful not to pull too hard, as this could damage the ports or the Joycons themselves.
Step 5: Store the Joycons
Once the Joycons are disconnected, you can place them in a safe and secure location. If you plan to use them again in the future, consider storing them in their protective cases or in a storage container to prevent any damage.
Step 6: Reassemble the Nintendo Switch
After you’ve disconnected the Joycons and stored them, it’s time to reassemble the Nintendo Switch. Place the back cover back on the console and secure it with the two screws you removed earlier. Make sure the cover is seated properly and the screws are tight.
Conclusion
Disconnecting Joycons from your Nintendo Switch is a simple process that can be done in just a few minutes. By following these steps, you can easily disconnect your Joycons for storage, cleaning, or any other reason. Just remember to power off the console before beginning and to handle the Joycons and ports with care to avoid any damage.
