How to Install Step On Bindings
Installing step on bindings can be a daunting task for beginners, but with the right guidance and tools, it can be a straightforward process. Step on bindings are a popular choice for snowboarders who want to switch between riding regular and switch without the hassle of unstrapping and re-strapping. In this article, we will walk you through the steps required to install step on bindings on your snowboard.
Before You Begin
Before diving into the installation process, it’s essential to gather all the necessary tools and materials. Here’s a list of items you’ll need:
1. Step on bindings
2. Snowboard
3. Allen wrenches (various sizes)
4. Binding tool (optional, but recommended)
5. Ratchet (optional, but recommended)
6. Screwdriver (optional, but recommended)
7. Safety goggles and gloves
Ensure that you have a clean, flat workspace with adequate lighting to work on your bindings.
Step 1: Prepare the Snowboard
1. Remove the existing bindings from your snowboard if they are already installed.
2. Locate the binding inserts on your snowboard deck. These are the holes where the bindings will be attached.
3. Clean the binding inserts with a rag to remove any dirt or debris.
Step 2: Attach the Bindings to the Snowboard
1. Lay your snowboard on its side with the base facing up.
2. Position the step on bindings over the binding inserts on the deck.
3. Use an Allen wrench to tighten the binding inserts into the deck. Make sure the bindings are level and centered on the board.
4. If you have a binding tool, use it to tighten the inserts more securely. If not, a ratchet and screwdriver will suffice.
Step 3: Install the Straps
1. Place the straps on the bindings, ensuring they are centered and aligned.
2. Tighten the straps using the ratchet or Allen wrench, making sure they are snug but not overly tight.
Step 4: Adjust the Bindings
1. Stand on the bindings and adjust the straps to your desired tightness. You should be able to slide your boots in and out of the bindings comfortably.
2. Adjust the highback and forward lean to your preference. This will help you achieve the best riding experience.
Step 5: Final Checks
1. Make sure all the bolts are tight and the bindings are securely attached to the snowboard.
2. Check that the bindings are level and centered on the board.
3. Give the bindings a test run to ensure they are functioning correctly.
Congratulations! You have successfully installed step on bindings on your snowboard. Now you can enjoy the convenience of switching between regular and switch riding without any hassle. Always remember to maintain your bindings and regularly check their tightness to ensure a safe and enjoyable snowboarding experience.
