Step-by-Step Guide- How to Successfully Install an Insinkerator Garbage Disposal

How to Install an Insinkerator: A Step-by-Step Guide

Installing an Insinkerator garbage disposal unit can be a straightforward and rewarding DIY project. These units are designed to make kitchen waste disposal more efficient and environmentally friendly. Whether you’re replacing an old unit or installing one for the first time, following these steps will ensure a successful installation. In this article, we’ll walk you through the process of how to install an Insinkerator, from preparation to final touches.

Step 1: Gather the Necessary Tools and Materials

Before you begin, make sure you have all the necessary tools and materials for the installation. You’ll need:

– Insinkerator garbage disposal unit
– plumber’s putty
– plumber’s tape
– screwdriver
– adjustable wrench
– level
– pipe wrench
– gloves
– safety goggles

Step 2: Turn Off the Power Supply

Safety should always be your top priority. Before you start the installation, turn off the power supply to the circuit breaker that controls the sink’s electrical outlet. This will prevent any accidental electrical shocks during the installation process.

Step 3: Remove the Existing Garbage Disposal (if applicable)

If you’re replacing an old garbage disposal, you’ll need to remove it. Start by turning off the power supply to the unit. Then, use an adjustable wrench to disconnect the power cord from the electrical outlet. Once the power is off, use a screwdriver to remove the mounting screws and detach the unit from the sink.

Step 4: Install the Mounting Assembly

Take the new Insinkerator unit and position it under the sink. Apply plumber’s putty around the sink flange to create a watertight seal. Place the mounting assembly on top of the putty and secure it with the mounting screws provided. Use a level to ensure the assembly is perfectly horizontal.

Step 5: Connect the Power Cord

Reconnect the power cord to the electrical outlet. Make sure the cord is properly seated and that the outlet is turned back on at the circuit breaker.

Step 6: Attach the Sink Flange

Line up the sink flange with the mounting assembly and secure it with the mounting screws. Tighten the screws evenly to ensure a secure fit.

Step 7: Connect the Drain Pipe

Position the drain pipe over the sink flange and tighten it with the adjustable wrench. Be sure to apply plumber’s tape to the threads of the pipe for a better seal.

Step 8: Secure the Unit to the Sink

Use the provided mounting screws to secure the garbage disposal unit to the sink flange. Tighten the screws evenly to ensure a stable installation.

Step 9: Test the Unit

Turn on the power supply to the circuit breaker and run the garbage disposal. Feed a small piece of fruit or vegetable down the disposal to test its functionality. If everything is working correctly, you should hear the unit running and the waste being ground down.

Step 10: Final Touches

Once you’ve confirmed that the Insinkerator is working properly, clean up any mess and dispose of any packaging materials. You can now enjoy the convenience and efficiency of your new garbage disposal unit.

Installing an Insinkerator is a relatively simple process, but it’s essential to follow these steps carefully to ensure a successful installation. By taking your time and being thorough, you’ll have a functional and reliable garbage disposal unit in no time.