How to Install Ruvati Undermount Sink: A Step-by-Step Guide
Installing a Ruvati undermount sink can transform the look and functionality of your kitchen or bathroom. This type of sink is not only stylish but also practical, as it provides a sleek, seamless look by sitting beneath the countertop. If you’re ready to upgrade your space with a Ruvati undermount sink, follow this step-by-step guide to ensure a successful installation.
1. Gather Your Tools and Materials
Before you begin, gather all the necessary tools and materials for the installation. You’ll need a screwdriver, a drill, a level, plumber’s putty, a utility knife, a bucket, a rag, and the Ruvati undermount sink itself. Make sure you have all these items ready to avoid any delays during the installation process.
2. Remove Old Sink (if applicable)
If you’re replacing an existing sink, start by turning off the water supply to the faucet. Then, unscrew the drain and remove the old sink. Be sure to clean the countertop thoroughly before proceeding.
3. Measure and Mark the Cutout
Using a tape measure, determine the dimensions of the Ruvati undermount sink and mark the corresponding area on the countertop. Make sure the marks are precise and level, as an uneven cutout can lead to an unstable installation.
4. Cut the Countertop
With a jigsaw or a circular saw, carefully cut out the marked area on the countertop. Be sure to wear appropriate safety gear, such as goggles and gloves, to protect yourself from any potential accidents. Once the cutout is complete, clean up any excess material or debris.
5. Install the Drain and P-trap
Attach the drain and p-trap to the sink. Follow the manufacturer’s instructions for proper installation. Make sure the drain is level and securely fastened to the sink. Connect the drain to the waste pipe and test for leaks.
6. Apply Plumber’s Putty
Apply a generous amount of plumber’s putty around the perimeter of the sink’s bottom lip. This will create a watertight seal between the sink and the countertop.
7. Position the Sink
Place the Ruvati undermount sink into the cutout, ensuring it is level. Press the sink down firmly to create a tight seal between the countertop and the sink’s bottom lip.
8. Attach the Faucet
Install the faucet according to the manufacturer’s instructions. This may involve threading the faucet into the sink’s hole and securing it with nuts. Connect the faucet to the water supply lines, and test for leaks.
9. Caulk the Edges
Apply a thin bead of caulk around the edges of the sink to seal any gaps and create a watertight seal.
10. Clean Up and Final Checks
Wipe away any excess plumber’s putty or caulk, and clean the sink and countertop thoroughly. Perform a final check for leaks and make sure everything is functioning as it should.
Congratulations! You’ve successfully installed your Ruvati undermount sink. Enjoy the sleek, modern look and improved functionality it brings to your kitchen or bathroom.
